Press-forging machine “АЖУР-1М”
Allows you to make all the most commonly used elements in artistic forging.
Features
• to make a goose foot from a square bar from 8×8 to 16×16 mm, a round bar from 8-16 mm, a profiled pipe from 10×10 to 20×20 mm and a standard strip 40×4 mm;
• to make peaks and dome peaks from a bar of round section from 8×8 to 16×16 mm, a bar of square section from 8×8 to 16×16 mm;
• engage in flexible forging elements from a profile pipe with a cross section of 10×10 to 25×25 mm, a square and round bar from 8×8 to 16×16 mm, a pipe with a cross section of 8-20 mm and a standard strip of 40×4 mm;
• to perform radius bending of a profile pipe with a cross section from 10×10 to 40×40 mm, a bar of square and round section from 8×8 to 20×20 mm, a pipe with a cross section of 8-40 mm and a standard strip of 40×4 mm;
• to perform radius bending of a standard strip 40×4 mm along the edge;
• perform reverse bending on a bar of square section from 8×8 to 16×16 mm, and round section of 8-20 mm;
• to apply a relief on a profile pipe with a section from 10×10 to 25×25 mm and a bar of square section 8-12 mm;
• to make rings from a profile pipe with a section from 10×10 to 15×15 mm, a square bar from 10×10 to 14×14 mm, a round bar from 6×6 to 12×12 mm, a pipe with a circular section from 8 to 12 mm and a standard strip 25×2 mm;
• to make baskets from a square bar 6×6, 8×8.10×10 mm and a round section 6.8.10 mm;
• reinforce the profile pipe with a cross section from 10×10 to 25×25 mm;
• roll out the ends from a profile pipe with a section from 10×10 to 25×25 mm;
• to make a goose foot from a profile pipe with a section from 10×10 to 25×25 mm.
