Horizontal press “АЖУР-3М”

The horizontal press “АЖУР-3М” is designed for the manufacture of geometric elements from bars of square and round sections, as well as a standard strip.

Features

The capabilities of the horizontal press “АЖУР-3М” allow:

• at high speed to engage in flexible geometric elements from bars of square and round section from 6 to 16 mm and a standard strip of 40 mm

• make decorative crimping of a square and round bar with a size of 8 to 22 mm and a standard strip of 40-60 mm

• to crimp the edges of a square bar from 8 to 20 mm

• deal with a radius flexible pipe with a cross section of up to 48 mm

• for hot production of peaks from a bar of square and round section from 8 to 40 mm in size

• to make hot goose foot from a bar of square and round section up to 20 mm in size

The speed of manufacturing the same type of elements is 3-5 seconds per element
A variety of finished molds more than 20 molds (it is possible to manufacture any pattern according to the customer’s request)
Country manufacturer of hydraulics Italy
Factory warranty 1 year

Elements made on the machine